Spray foam insulation creates an air seal and insulation layer in a single application — it expands to fill gaps and adheres to the surrounding surface, eliminating air infiltration that other insulation types can't address. Contractors in our network install both open-cell and closed-cell spray foam for homeowners and commercial properties throughout Haltom City and Tarrant County.

Haltom City is an older, working-class Tarrant County suburb bordering Fort Worth, built out primarily during the postwar decades of the mid-20th century rather than in the more recent growth waves that shaped many of its DFW neighbors. That means a larger share of Haltom City's housing stock is 1950s-70s construction with thinner original attic insulation than newer Metroplex cities, and fewer large-scale recent subdivisions to offset that older base with newer, better-insulated homes. The city sits on the Blackland Prairie clay common across central Tarrant County, and shares North Texas's seasonal pattern of hot, humid summers followed by sharp winter cold fronts that stress older, underinsulated attics from both directions. Because Haltom City's growth has been slower and more incremental than boomtowns like McKinney or Kyle, its housing stock skews meaningfully older on average, making insulation upgrades a more broadly relevant conversation here than in cities where most homes were built within the last two decades.

Open-Cell vs. Closed-Cell Foam

Open-cell foam has a lower R-value per inch (around R-3.5) but is less expensive and expands aggressively to fill cavities. It's vapor-permeable, which makes it appropriate for some wall applications in this climate. Closed-cell foam has a higher R-value per inch (around R-6-7), is rigid, and acts as a vapor barrier — it's the right choice for crawl spaces, exterior walls in high-moisture areas, and unvented attic assemblies. We recommend the right type for your specific application.

Some rooms are noticeably harder to heat or cool than others

Uneven temperatures between rooms, especially rooms above or below an attic, are a common sign of insufficient or unevenly distributed insulation.

Noticeably higher heating and cooling bills than similar-sized homes nearby

This is one of the more measurable signs that a home is losing conditioned air faster than it should — worth a comparison before assuming it's just an old HVAC system.

Ice dams forming on the roof edge in winter, or a hot, stuffy attic in summer

Both point to heat escaping into the attic space rather than staying inside the living area — a classic insulation-and-ventilation combination issue.

When Spray Foam Is the Right Choice

Spray foam is particularly valuable when air sealing is the primary goal, when you're insulating unusual shapes or hard-to-access cavities, when you need insulation in a vented or conditioned crawl space, or when you're doing an unvented attic assembly. It's generally more expensive than blown-in or batt insulation per square foot — we'll tell you when the premium is justified.

Have Questions?

We're happy to walk through your situation before you commit. Call us and we'll tell you honestly whether an upgrade makes financial sense for your home.

Call (469) 210-0277

This content is reviewed by the Texas Insulation Pros editorial team and informed by licensed-contractor sourcing, manufacturer documentation, and established industry standards for Insulation. Read our editorial standards.